full service NDT since 1990

Danatronics EHC-09 / EHC-09 Color Wave

Ultrasonic thickness gauges from the company Danatronics EHC-09 series and EHC-09 color wave.

Danatronics EHC-09 series / model EHC-03

Ultrasonic thickness gauges Danatronics EHC-09 series are unique when speaking of their functions as for instance:

Vibrations and illuminating of the keypad when exceeding the limits, information about wearing of the probe and its replacement, live view A-scan, B-scan and memory for 100 000 values, possible upgrade to a higher model, measuring through coatings. All this for efficient price!
American company Danatronic corporation has developed the universal thickness gauge EHC-09 in the way so that the using of the device would be super easy and at the same time with the most effort to develop a unique device with only those functions which will be useful for the operator. At measuring you can fully rely on the optional alarms that will warn you anytime the measured value exceeds the adjusted limits by vibrations, beeping, displaying or illuminating the keypad.
 

Specifications:

  • Size: 127 mm x 76 mm x 32 mm
  • Weight: 230 g
  • Range: 0.40 mm - 508 mm, depends on the material, temperature and the used probe 
  • Range of speed: 0.508 – 18.699 mm/uS
  • Operating temperature: -20° C do 50° C
  • Operating temperature of the material from -20° C to 537° C depending on the probe
  • Battery operating time: 12 hours
  • Battery type: 2 x AA Alkalic
  • Display: 128 x 64 graphical LCD
  • Definition: 0.01 mm, 0.1 mm
  • Choice of the probe: list of the probes in the menu
  • Echo-echo measuring, over-coat measuring
  • Delay line measuring: automatically at turn on.
  • Ideal at measuring with pencil probes (hard to reach areas/radiused parts/thin materials and high temperature surfaces)
  • Illumination of the keypad as an optional alarm
  • Frequence range: 0.5-20 MHz (-3dB)
  • Units: Inches/milimeters/microseconds
  • Amplification: low, standard and high
  • Measuring frequence: 4Hz a 20Hz
  • Displayed information: LOS, min, max, value displayed with big digits, speed, annuling, calibration, units, freezing, % battery
  • Diferencial measuring: displays the difference between the chosen referencial value
  • Programmable alarm: Minimum/Maximum, vibrations, beeping and flashing of display or the backlight of the keys F1 = red (over limit), F2 = yellow (attention!) ang F3 = green (ok)
  • Automatic notification when the probe is worn - replacement notification
  • Ergonomy: setting for left- and righthanded (patent)
  • Backlight: LED light, on/off or automatically by pressing the button or at measuring
  • Automatic off after optional time of inactivity
  • Scan mode: displays minimum or maximum at repeating frequency 20 Hz (suitable for hot surfaces and speedy search of minimum).
  • Screen shot function
  • holding a value - the value remains on the screen even after the probe has been removed 

 

Version EHC-03 is the basic model of Danatronics brand, the device is offered only with the standart 5MHz probe DKS-537, it can not be upgraded

Functions:

the device can be anytime upgraded (except for the model EHC-03)
 
Functions EHC-09DL EHC-09 EHC-09B
Range 0.4mm - 508mm Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Automatic zero setting of the probe after turning on Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Scan Mode shows the found maximum and minimum at sampling 20 Hz Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Hold Mode holds the display of measured values even after the probe have been removed Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Freeze Mode freezes the display Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Units inches/milimeters Funkce je k dispozici Funkce je k dispozici Funkce je k dispozici
Gain Setting of strenghtening low-standard-high Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Differential Mode Shows the difference from the chosen referencial thickness Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Alarms Minimum/Maximum Switches the optional alarm when exceeding the selected maximum or minumum limits - vibrations, beeping, display, iluminating keypad  Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Illuminating Keypad F1 = red, F2 = yellow and F3 green for easy indication go/no-go testing Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Automatic Probe Wear Indicator Automatically notifies the user of wearing and necessary replacement of the probe Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Echo to Echo Measuring through the majority of standard coating without a measuring error Funkce je k dispozici Funkce je k dispozici Funkce není k dispozici
Non-Encoded B-Scan Display of graphical B scan-graphically dispays the opposite wall Funkce je k dispozici Funkce není k dispozici Funkce není k dispozici
Data Logger Version Memory for 50 000 values (expandable for 100 000) + PC software and USB cable Funkce je k dispozici Funkce není k dispozici Funkce není k dispozici
Carry Pouch Blue resistant case for the device (possible to buy additionally) Funkce je k dispozici Funkce není k dispozici Funkce není k dispozici
UT thickness gage Danatronics EHC 09UT thickness gage Danatronics EHC 09 02

Probes for the device:

Probe marking Range of measuring in steel Range of measuring in the Echo-Echo mode Frequency Diameter of the converter Temperature range
DC110 .200” - 20" (5.08mm-508m) does not measure in Echo-Echo mode 1.0 MHz 1"/25.4mm 32-122F/0-50C
DC175 .150”-20” (3.81mm-508mm) does not measure in Echo-Echo mode 1.0 MHz 0.75”/19.05mm 32-122F/0-50C
DC250 0.1" - 20" (2.5mm-508mm) 0.200”- 5” (5.08mm-127mm) 2.25 MHz 5"/12.7mm 32-122F/0-50C
DK250 0.1" - 20" (2.5mm-508mm) 0.200”- 5” (5.08mm-127mm) 2.25 MHz .5"/12.7mm 32-392F/0-200C
DC525 0.030" - 20" (.76mm-508mm) 0.078”- 2” (2mm-50.8mm) 5.0 MHz 0.25”/6.35mm 32-122F/0-50C
DK525 0.030" - 20" (.76mm-508mm) 0.078”- 2” (2mm-50.8mm) 5.0 MHz 0.25”/6.35mm 32-392F/0-200C
DC537 0.040" - 20" (1mm-508mm) 0.078”- 2” (2mm-50.8mm) 5.0 MHz .375"/9.52mm 32-122F/0-50C
DK(S)537 0.040" - 20" (1mm-508mm) 0.078”- 2” (2mm-50.8mm) 5.0 MHz .375"/9.52mm 32-392F/0-200C
DHT-537 0.040" - 20" (1mm-508mm) 0.078”- 2” (2mm-50.8mm) 5.0 MHz .375"/9.52mm (-5 to 950F or -20-509C)
DC550 0.030" - 20" (.76mm-508mm) 0.078”-2.0” (2mm-50.8mm) 5.0 MHz .5"/12.7mm 32-122F/0-50C
DC550 0.030" - 20" (.76mm-508mm) 0.078”-2.0” (2mm-50.8mm) 5.0 MHz .5"/12.7mm 32-122F/0-50C
DK550 0.030" - 20" (.76mm-508mm) 0.078”-2.00” (2mm-50.8mm) 5.0 MHz .5"/12.7mm 32-392F/0-200C
DK718 0.030" - 2.0" (.76mm-50mm) 0.059”-1.0” (1.5mm-25.4mm) 7.5 MHz .187"/4.75mm 32-392F/0-200C
DC1025 0.020" – 2.0" (.5mm-48.2mm) 0.059”-1.0” (1.5mm-25.4mm) 10.0 MHz .25"/6.35mm 32-122F/0-50C
DK1025 0.020" – 2.0" (.5mm-48.2mm) 0.059”-1.0” (1.5mm-25.4mm) 10.0 MHz .25"/6.35mm 32-392F/0-200C
DK10125 0.040" - 0.75" (1mm-19mm) does not measure in Echo-Echo mode 10.0 MHz .125"/3.17mm 32-122F/0-50C
DK718EE 0.040" – 1.5" (1mm-38.1mm) 0.059" – 1.0" (1.5mm-25.4mm) 7.5 MHz .187"/4.75mm 32-392F/0-200C
DK537EE 0.040" - 20" (1mm-508mm) 0.078”-1.5” (2mm-38.1mm) 5.0 MHz .375"/9.52mm 32-392F/0-200C
DLC525RM     5.0 MHz .25"/6.35mm 32-122F/0-50C
DLC1025RM     10.0 MHz .25"/6.35mm 32-122F/0-50C
DLK525RM     5.0 MHz .25"/6.35mm 32-122F/0-50C
DLK1025RM     10.0 MHz .25"/6.35mm 32-122F/0-50C
 
UT thickness gage Danatronics EHC 09UT thickness gage Danatronics EHC 09 
Device Type of upgrade Description
EHC-09B EHC09 Upgrade of the device on version EHC-09
  EHC09DL Upgrade of the device on version EHC-09DL
EHC-09 B-Scan B-scan activation
  Echo-Echo E-E activation of measuring over coating
  EHC09DL Upgrade of the device on version EHC-09DL
 
The device can be upgraded anytime - expand the functions with bought activation code. Above is the table of all upgrade possibilities.
 

Danatronics EHC-09

B-scan:

the newest function available in the DL version as standard and as chargeable function for EHC-09
B-scan can be saved into the memory of the device and inspect further. In the picture there is depicted the cursor too (vertical line), which in B-scan displays the value in the right upper corner. For this function the firmware 1.3.1. needs to be instaled. 

Danatronics EHC-09
 

Danatronics EHC-09 Color Wave

Danatronics brings on our market the world smallest ultrasonic thickness meter with high colour definition live A-display Danatronics EHC-09 Wave. This unique device contains colourful A-Scan, B-Scan, memory for 50 000 measurings (5000 A-scan) along with the software equipment for PC, vibrations and change of the display colour when exceeding the limit.

The live view is important at demanding measurings, when it is needed to verify whether the displayed thickness corresponds with the real thickness. A typical application is measuring in the petrochemical industry, power plants and likewise, where we can come accross measuring of critical parts as for example compresive containers, tanks, parts with high temperature etc. The live display helps to exclude erroneous measurements. 

specification:

  • The first colourful thickness meter with A-scan
  • Possibility of changing the colour scheme
  • Changes colours at the adjusted Alarm-limit
  • 50 hours of battery operation
  • Very contrastive display, visible from far distance
  • Possible to set vibrations when reaching the Alarm-limit
  • Illuminated keypad
  • optional case
  • memory for 50 000 values
  • B-Scan
  • Echo - Echo for measuring through coatings-paint
  • Possible to upgrade the device anytime after buying the code which is then not required to connect with the computer or send anywhere
  • 2 years of guarantee, after guarantee service

dana09c 1

dana09c 2  dana09c displej2  dana09c displej3
 dana09c displej4  dana09c displej5  dana09c displej6

 

Send an Email. All fields with an (*) are required.
Address: PTS Josef Solnař s.r.o.
  U Hrůbků 170
  709 00 Ostrava Nová Ves
  Czech Republic
Phone: +420 596 744 163-164
Mobile: +420 777 175 174
E-mail