full service NDT since 1990

PocketMIKE Thickness Gage

The PocketMIKE’s integrated product design combines the instrument and transducer into a single package, allowing for true single hand operation and providing a very capable, yet simple to use device.

The PocketMIKE thickness gauge is packaged in a machined stainless steelhousing environmentally sealed to IP67.

Four button operation and Automatic On-Block Probe Zero further support GE'sgoal of providing very capable yet simple to use instruments.

The high contrast backlit display can be mechanically and electronically rotated for ease of reading in any orientation.

Optionally we supply Stepped calibration blocks, binding gels, certified training and accredited calibration.

 

Applications:

The PocketMIKE is a handheld corrosion and general purpose thickness gage with a 5 MHz probe for standard applications such as inspection of corrosion and pitting, boilers, tanks, pipes, and tubes.

Tloušťkoměr Pocket-MikeTloušťkoměr Pocket-Mike

 

Key Features and Benefits

  • Compact design: probe and display unit in one and the same instrument - Never brake a cable again!
  • Direct readout of the digitally displayed thickness value on large, pivoting LCD display
  • Easy and straight-forward operation via four keys
  • Calibration to known wall thickness or to known material velocity
  • Optional backlight (ON, OFF, AUTOMATIC)
  • Integrated, exchangeable 5 MHz probe for all standard applications
  • Measurement range from 1 mm to 250 mm (0.040 inch to 9.999 inch) depending on material and surface
  • Standard AA batteries
  • Machined stainless steel housing. Environmentally sealed for measurements under rough conditions.

 

Physical Size 4 x 1.38 x 0.5 inches (High x Nominal Diameter x Probe Diameter)
Weight 200 grams with Battery
Power Source One 1.5V AA Alkaline Battery
Measuring Range 1.0mm to 250 mm (0.040 inches to 9.999 inches)
Displayed Resolution 0,01 up to 99,99mm, 0,1 above (0.001 up to 9.999 inches, 0.01 above)
Operating Temperature -10º C to +50º C (14º F to 122º F)
Probe Surface Temperature -10º C to +100º C (14º F to 212º F)

 

The package contents

  • device
  • hand strap
  • 1 x 1.5V AA battery
  • case
  • integrated probe
  • binding gel
  • manual

Tloušťkoměr Pocket-MikeTloušťkoměr Pocket-Mike

 

Other thickness gauges

Ask yourself what you are interested in, call or use the contact form at the bottom of the page.

Send an Email. All fields with an (*) are required.
Address: PTS Josef Solnař s.r.o.
  U Hrůbků 170
  709 00 Ostrava Nová Ves
  Czech Republic
Phone: +420 596 744 163-164
Mobile: +420 777 175 174
E-mail