full service NDT since 1990

MH series magnetic field gaussmeters

MH series magnetic field gaussmeters (new 2015 models, which replace and unify models MH 05, MH 06, MH 07, MH 7.5)

are designed for measuring of the magnetic field or residual field using the Hall probe in the kA/m or in Gauss, depending on the model.

 

(see description by pointing the mouse cursor on the star)

MH175 - Magnetic field gaussmeter

 

MH175 - Měřič intenzity magnetického poleMH175 - Měřič intenzity magnetického pole

 

Measuring range ±0 - 20 kA/m
Resolution 10 A/m
Measured field alternating, direct with polarity indication (button selection)
Signalization of AC field " ~ "
Probe manual removable tangential Hall probe
Automatc zero setting yes, after each turning on of the device
Weight 203g including the probe and batteries
Dimensions 78x117x22 mm
Accuracy

DC ± 3% + 1 dig. from the measured value
AC ± 5% + 1 dig. from the measured value

Frequency range 10 Hz until 1kHz for AC measurement according to specification
Power supply

2 x AA 1.5 V alkaline battery

Automatic power off

after 5 minutes (always - in active or standby mode)

Low battery indicator

when power supply drops below 2V "LOBAT" sign is shown on the display

Consumption current

typically 24 mA

Operating temperature from 0ºC to +50ºC (from 32ºF to 122ºF)

Supplied in case with probe and batteries.

MH175 - Měřič intenzity magnetického poleMH175 - Měřič intenzity magnetického pole

 


MH107 - Residual magnetic field gaussmeter

 

MH107 - Měřič zbytkového magnetického poleMH107 - Měřič zbytkového magnetického pole

 

Measuring range ±0 - 20 kA/m, 0 - 200 Gauss
Resolution 10 A/m  or 0.1 Gauss
Selection of units of measurement with a button, A/m or Gauss
Measured field direct with polarity indication
Probe manual removable tangential Hall probe
Automatc zero setting yes, after each turning on of the device
Weight 203g including probe and batteries
Dimensions 78x117x22 mm
Accuracy

DC ±3% + 1 dig. from the measured value

Frequency range 10 Hz until 1kHz
Power supply

2 x AA 1.5 V alkaline battery

Automatic power off

po 5-ti minutách (vždy - při činnosti i nečinnosti přístroje)

Low battery indication

when power supply drops below 2V "LOBAT" sign is shown on the display

Consumption current

typically 24 mA

Operating temperature from 0ºC to +50ºC (from 32ºF to 122ºF)

Supplied in case with probe and batteries.

 

MH107 - Měřič zbytkového magnetického poleMH107 - Měřič zbytkového magnetického pole

 


MH 107S - Stationary residual magnetic field gaussmeter

 

MH 107S - Stacionární měřič zbytkového magnetického poleMH 107S - Stacionární měřič zbytkového magnetického pole

Measuring range ±0 - 20 kA/m, 0 - 200 Gauss
Resolution 10 A/m  nebo 0,1 Gauss
Selection of units of measurement with a button, A/m or Gauss
Measured field direct with polarity indication
Probe integrated into the device, tangential Hall probe
Automatc zero setting yes, after each turning on of the device
Dimensions 185x193x56 mm
Weight 780g including integrated battery, without network adapter
Accuracy

DC ±3% + 1 dig. from the measured value

Frequency range 10 Hz until 1kHz
Low battery indication

when power supply drops below 2V "LOBAT" sign is shown on the display

Consumption current

typically 24 mA

Operating temperature from 0ºC to +50ºC (from 32ºF to 122ºF)

MH-107S is a stationary equipment for measuring intensity of residual magnetic field of small items. The device provides automatic zero setting. It has integrated battery and supplied with network adapter.

 

MH 107S - Stacionární měřič zbytkového magnetického poleMH 107S - Stacionární měřič zbytkového magnetického pole

Ask yourself what you are interested in, call or use the contact form at the bottom of the page.

Send an Email. All fields with an (*) are required.
Address: PTS Josef Solnař s.r.o.
  U Hrůbků 170
  709 00 Ostrava Nová Ves
  Czech Republic
Phone: +420 596 744 163-164
Mobile: +420 777 175 174
E-mail