Bench type equipment

Bench & mobile type MPI equipment MAS 500

• 
• 

Details

Published on Tuesday, 24 February 2009 21:47

Written by Sasa

Hits: 1272

Bench type and mobile type equipment MAS 500 series are offered for serial control of products by magnetic particle inspection (MPI).

  

Bench type equipment MAS 500

Bench type equipment is intended for MPI of small details of ferromagnetic steels on presence of longitudinal or cross defects at external surface. This equipment is intended for the piece control and it has a simple design. There are 2 methods of holding a testing detail:
1) holding a detail between two clamps where pressure power is provided by distribution bar,
2) detail arrangement on the bars with current contacts.
These methods replace the necessity for application of pneumatic clamps.

• Longitudinal and cross magnetization by means of two independent adjustable sources in the range up to 1000 A
• Longitudinal magnetization is adjusted smoothly, cross magnetization in 3 steps
• The magnetization is controlled by the footswitch (on time or automatic – optional)
• Digital ampermeters
• Ultraviolet lamp 400 W
• Pump for the closed circulation of test suspension
• Adjustment for length of controllable object

---

Bench type equipment MAS 500 ME Plus

Bench type equipment is intended for MPI of small details of ferromagnetic steels on presence of longitudinal or cross defects at external surface. This equipment is intended for the piece control and it has a simple design. There are 2 methods of holding a testing detail:
1) holding a detail between two clamps where pressure power is provided by distribution bar,
2) detail arrangement on the bars with current contacts.
These methods replace the necessity for application of pneumatic clamps.

•  Magnetizing coil for longitudinal magnetization
• Clamp: length max 520 mm, min 50 mm (possibility of length adjustment at will)
• Coil diameter: 200 mm
• Stainless bath with a pipe-bend
• Handle clamp of the controlling object
• Ultraviolet lamp 400 W
• Current clamps are on one side of the equipment

---

Bench type equipment MAS 500 ME

Bench type equipment is intended for MPI of small details of ferromagnetic steels on presence of longitudinal or cross defects at external surface. This equipment is intended for the piece control and it has a simple design. There are 2 methods of holding a testing detail:
1) holding a detail between two clamps where pressure power is provided by distribution bar,
2) detail arrangement on the bars with current contacts.
These methods replace the necessity for application of pneumatic clamps.

•  Magnetizing coil for longitudinal magnetization
• Clamp: length max 520 mm, min 50 mm (possibility of length adjustment at will)
• Coil diameter: 200 mm
• Stainless bath with a pipe-bend
• Handle clamp of the controlling object
• Current clamps are on one side of the equipment