Coating gages
- Details
-
Published on Friday, 19 March 2010 15:52
-
Written by Administrator
-
Hits: 884
Coating thickness gauges TM 510 FN is professional level gauges for industrial users who need precise and easy to use measurements with statistic functions.
- Measuring modes: continuous/single
- Shutdown modes: manual/automatic
- Wide measuring range with 5 probes available (next page)
- Direct testing mode and block statistics mode (APPL/BATCH)
- Direct print out of statistical values
- Dataview to connect with PC
- 500 data can be stored
Technical specifications
Standard delivery
| Main unit | 1 |
| Probe F1 or N1 | 1 |
| Charger | 1 |
| Calibration foils | 1 |
| Instruction manual | 1 |
| TMTeck cetificate | 1 |
| Warranty card | 1 |
| Carrying case | 1 |
Optional accessories
- 5 probes for different applications
- PC software Dataview for online and data transfer
- Calibration foils in various thickness
- Communication cable
Option probes for TM510FN
Type F probe ：
| Probe | F400 | F1 | F1/90° | F10 |
| Measuring Principle | Magnetic method |
| Measuring range(mm) | 0～400 | 0～1250 | 0～10000 |
| Min resolution(mm) | 0.1 | 0.1 | 10 |
| Tolerance | One-point calibration (mm) | ±(2%H+0.7) | ±(2%H+1) | ±(2%H+10) |
| Two-point calibration (mm) | ±(1%H+0.7) | ±((1%H+1) | ±(1%H+10) |
| Minimum radius of curvature (convex) (mm) | 1 | 1.5 | flat | 10 |
| Minimum measuring area(mm) | F3 | F7 | F7 | F40 |
| Minimum thickness of base material(mm) | 0.2 | 0.5 | 0.5 | 2 |
| | | | | | | |
Type N probe ：
| Probe | N400 | N1 | CN02 |
| Measuring Principle | Eddy current method |
| Measuring range (mm) | 0～400 | 0～1250 | 10～200 |
| Min resolution(mm) | 0.1 | 0.1 | 1 |
| Tolerance | One-point calibration (mm) | ±(2%H+0.7) | ±(2%H+1.5) | ±(2%H+1) |
| Two-point calibration (mm) | ±(1%H+0.7) | ±（1%H+1.5） | -------- |
| Minimum radius of curvature (convex) (mm) | 1.5 | 3 | flat |
| Minimum measuring area(mm) | F4 | F5 | F7 |
| Minimum thickness of base material(mm) | 0.3 | 0.3 | 0 |
